CNG Regulators Model AT12 STANDARD
CNG Regulators Model AT12 STANDARD
Regulator for CNG sequential injection systems Tomasetto CNG pressure reducer model AT12 is a 2 stages pressure reducer for sequential injection systems.
Compact and very reliable, it is homologated in accordance with ECE R110, approved in accordance with Enargas, Inmetro and other local regulations. The outlet pressure is adjustable from 0.12 to 0.25 MPa to obtain always the best performance. The reducer inlet is provided with an adjustable swivel fitting and the connection for pressure manometer. In the new version 2019, the main body shape has been modified in order to improve the heating circuit and to allow the use of bigger water fittings d.16 mm (when needed); it is also possible to put water fittings in 2 different layouts (parallel or at 90° like in previous version) with the aim to ease the installation.
AT12 STANDARD Model AT12 Standard version is equipped with a low-pressure solenoid valve.
VERSION | STANDARD |
|---|---|
Type of product | CNG sequential regulator |
Material | Die cast aluminium body |
Weight | 1,45 kg |
Dimensions (mm) | 120x150x155 mm |
Max inlet pressure | 26 MPa (260 bar) |
1° stage pressure | 0,60 Mpa (6 bar) |
Outlet pressure * | Adjustable from 120 to 250 kPa |
Coil voltage | 12 V DC |
Coil power | 17 W |
Coil connection | Fast-on (AMP upon request) |
Inlet connection | M12x1 pipe Ø 6 mm |
Outlet connection | Fixed fitting Ø 12,5 mm |
Water connection | For rubber pipe Ø 8 mm |
Water connection | For rubber pipe Ø 8 mm (others upon request) |
Engine power ** | Up to 125 kW |